EX4U Telecom
OTP

EX4U IP VIDEO ACCESSORIES    

EX4U provides a wide range of accessories that complements its network cameras and video servers and assists in your network video installation. Contact us for purchases of certain network cameras and housings bundles.

Protective housings
For mounting EX4U network cameras outdoors and in harsh, humid and dusty indoor environments.


 The 206/207 Vandal Resistant Housing
(#26550 - 206/W, 207/W) provides a tamper-resistant solution for indoor security applications using EX4U 206 or 207 Network Cameras. It is an ideal solution for prisons, schools, institutions and government facilities.
Made of cast aluminum, the housing has high impact resistance and tamper-resistant screws, with side and top cable access ports. The surface-mount housing is designed for quick and simple installation. 
Europe, North & Central America
Features
Detention grade housing
Impact-resistant dome and tamper-resistant screws
Cast aluminum construction with side and top cable access
Indoor installations only

 290B Outdoor Housing  (#0195-004 - 211, 211A, 221DN, 230)
IP65 classified housings from EX4U offer a convenient and tailor-made solution for mounting EX4U network cameras outdoors, and within other harsh environments. Tamper-proof your cameras and protect them against dust and heavy jet spray. Temperature controlled heating even ensures continued camera operation in cold weather conditions from -4°F (-20°C) to +108°F (+42°C). The unit includes temperature controlled heating. The housing should not be installed in areas that are subject to many hours of direct sunlight as the camera may overheat and become damaged. Integral tamper-proof wall mounting bracket.  Europe, North & Central America

 The ACH13HB Outdoor Housing  (#24889 - 211, 211A, 221DN ) or Indoor Housing (#21899 - 210) provides protection for EX4U network cameras in both hot and cold climates. The housing was designed to meet IP65 standard of protection.
The body is constructed of an attractive white finished aluminum with black end caps. The housing ships with a 24VAC heater and blower that enables the EX4U network camera to operate in temperatures from –20° F to +120° F.  North & Central America.

 The Pendant Dome Indoor protects EX4U network cameras in outdoor environments as well as indoor conditions that may be humid, cold or dusty.
The housing provides IP66-class protection from dust and water ingress. With fan-assisted heating, the housing enables the camera to operate in temperatures down to -4˚ F (-20˚ C).
The dome ships with an optically clear polycarbonate lower dome that can be replaced with a tinted version. The housing provides an internal protective passage for cables and is easy to install on ceilings and walls.
213PTZ, 214PTZ, 231D+, 232D will fit in the Pendant Dome Indoor (#25735).  North & Central America.

 The Indoor Recessed Enclosure (#21898) is a low profile indoor ceiling housing that protects the EX4U 213 PTZ Network Camera.
The housing ships with a smoked dome that allows for discreet surveillance. Its lower semi-sphere is constructed of distortion free, cell-cast acrylic. For quick and correct installation, the housing ships with a cardboard template for cutting the proper size opening for the enclosure in a drop ceiling. Two anchor points on the metal housing enable the unit to be secured to superstructure.
A white powder coat trim gives the Indoor Recessed Enclosure a clean, professional look.
Indoor Fixed Camera Dome (#22870) fits 210, 210A, 211, 211A, 230.  North & Central America.

 The Pendant Dome Outdoor protects EX4U network cameras in outdoor environments as well as indoor conditions that may be humid, cold or dusty.
The housing provides IP66-class protection from dust and water ingress. With fan-assisted heating, the housing enables the camera to operate in temperatures down to -4˚ F (-20˚ C).
The dome ships with an optically clear polycarbonate lower dome that can be replaced with a tinted version. The housing provides an internal protective passage for cables and is easy to install on ceilings and walls.
213PTZ, 214PTZ, 231D+, 232D will fit in the Pendant Dome Indoor (#25733).  North & Central America.









 Indoor Vandal Resistant Housings provide maximum protection for fixed EX4U Network Cameras. The three separate models provide mounting options for walls, corners and ceilings. All are constructed with a 14-gauge steel and off-white powder coat finish.

The housings ship with a clear Lexan viewing window for increased protection against vandalism. An easy-to-replace Window Guard™ paint shield allows vandalized windows to be quickly and economically restored to clarity. All mounting hardware is fully contained inside the housing to prevent tampering.
Features
14-gauge steel body
220'' thick clear polycarbonate window (3/16'' thick window on the ceiling mount version)
Window Guard paint shield for vandal protection included
Off white powder coat finish
Easy installation and servicing
Indoor Vandal Resistant Housings fits 210, 211, 211A, 221DN,.
Wall      #24886
Weight (excluding power supply): 8 lbs,  H x W x D: 8.25 x 5.5 x 8.5 inches
Corner  #24887
Weight (excluding power supply): 7 lbs,  H x W x D: 8.25 x 5.5 x 8.5 inches
Ceiling  #24888
Weight (excluding power supply): 2.2 lbs,  H x W x D: 8.37 x 5.44 x 4.67 inches
North & Central America



 Verso Outdoor Housing  (HPV42K1A000)  protects EX4U network cameras in outdoor and adverse indoor conditions.
Made of the newest, most resistant technopolymer, the housing has high impact resistance and offers protection against dust, heavy rain and UV rays.
Stylishly designed and attractively priced, the housing enables the EX4U network cameras to operate in temperatures down to -20 °C (-4 °F). Various brackets and accessories including a blower kit are available.
Benefits
The housing protects EX4U network cameras in harsh environments.  
Europe
Suitable for the 210 (indoors only), 210A (indoors only), 211, 211A and 221DN Network Cameras. Bundles available for 211 and 221 Day & Night
IP66 classified – for protection against dust and heavy jet spray
IK 10 impact resistance, which means the housing is well protected against vandalism
Temperature controlled heating ensures continued camera operation in cold weather conditions down to –20 °C (68 °F) up to 45 °C (113 °F)
Lightweight high quality UV-resistant technopolymer material
Important - Accessories needed: brackets for mounting in different locations (with cabling through or standard options)

 Verso Cool Outdoor Housing (VT Verso Housing Fan HPV42K0A017) protects EX4U network cameras in outdoor and adverse indoor conditions.  Europe
Made of the newest, most resistant technopolymer, the housing has high impact resistance and offers protection against rain and UV rays.
Stylishly designed and attractively priced, the housing enables the EX4U network cameras to operate in temperatures up to +50 °C (122 °F) thanks to the built-in fan, but also down to -20 °C (-4 °F) when using a heater accessory.
Benefits
Temperature controlled fan ensures continued camera operation in warm weather conditions (up to +50 °C)
Suitable for the 210 (indoors only), 210A (indoors only), 211, 211A and 221DN Network Cameras
Indoor and outdoor installation
IP44-rated protection against rain
Made entirely of high quality, technopolymer (polycarbonate)
High resistance to impact
Accessories available: heater, mounting brackets

 Videotec DBH24K Dome Housing protects the EX4U 213PTZ, 214PTZ, 231D+ and 232D+  Network Dome Cameras in outdoor environments, as well as in indoor conditions that may be humid, cold or dusty.
The housing provides IP65-class protection from dust and water. With a protective outer sunshield and fan-assisted heating, the housing enables the camera to operate in temperatures ranging from +50 °C to –20 °C   (+122 °F to -4 °F).
Designed to look like a traditional lighting system, the housing allows for discreet surveillance. Its lower semi-sphere covering comes in clear or semitransparent black acrylic glass (PMMA). The housing provides an internal protective passage for cables and is easy to install on ceilings and walls.
Benefits
The housing allows network cameras to be used in outdoor and other harsh environments.
IP65 classified - dust-tight and protection against water jets
Temperature controlled heating ensures continued camera operation in cold weather conditions down to –20 °C (-4 °F) up to +50 °C (+122°F).
Important! Accessories needed: brackets for mounting on any surface - (see list for 213, 214, 231D+ and 232D+).
IR Illuminators

 



with IR light

without IR light
 Use the IR Illuminator in combination with EX4U network cameras in low-light or complete darkness and you'll have good quality images round the clock without attracting attention. Use the IR Illuminator in combination with EX4U network cameras in low-light or complete darkness and you'll have good quality images round the clock without attracting attention.
The high quality IR Illuminator can be used in indoor and outdoor environments for both semi-covert and covert applications. The adjustable power settings offer the possibility to match the scene's requirements.
The low power consumption of the illuminator's solid-state LEDs (light-emitting diodes) results in ultra-long lifetime and very low running cost.
Features:
Improved image quality in low-light situations and in complete darkness
Up to 98 feet/30 meters range
Automatic dawn/dusk power on/power off
Semi-covert or completely covert models.
Ultra-long lifetime (5+ years)
Use indoors/outdoors (outdoor use requires a suitable outdoor power supply)

Applications:
Low-light surveillance - 24 hours/day: where light conditions are less than optimal.
Discreet surveillance: where the use of artificial light is restricted.
Covert surveillance: where the use of surveillance cameras should not be apparent.
Supported cameras: 213PTZ, 214PTZ, 221 DN, 225FD, 230 MPEG-2, 232D+

Selection guide:
EX4U offers four different LED-based IR Illuminators, which emit infrared light that is invisible to the naked eye. The 850 nm models provide a better range than the 940 nm models. The 850 nm LEDs, however, display a faint red hue, while the 940 nm models do not.

Illuminator model
 
Type
 
Range
213 PTZ
Range 221Range 214 PTZ,
230, 232D+
Range
225FD
ACC IR Illuminator
850nm 30º
semi-
covert
66 feet
(20 m) 
171 feet
(52 m) 
98 feet
(30 m) 
52 feet
(16 m)
ACC IR Illuminator
850nm 60º
semi-
covert
52 feet
(16 m)
135 feet
(41 m)
82 feet
(25 m)
40 feet
(12 m)
ACC IR Illuminator
940nm 20º
covert43 feet
(13 m)
86 feet
(26 m)
66 feet
(20 m)
30 feet
(9 m)
ACC IR Illuminator
940nm 50º
covert33 feet
(10 m)
63 feet
(19 m)
49 feet
(15 m)
23 feet
(7 m)

nm = nanometer wave length of LED, light emitting diode
Power over Ethernet
Network video without the need for power outlets.

 

 With the use of Power over Ethernet (PoE) products, EX4U network video products can receive both data and power over a single Ethernet cable.
The PoE products enable EX4U network cameras and video servers to be installed in areas where traditional power cabling and outlets are unavailable or difficult to install. Power over Ethernet offers an easier, faster and more cost-effective solution than installing new power outlets and electrical cabling.
Features
No need for power outlets - Network cameras and video servers can be located in places where traditional power cabling and outlets are unavailable or difficult to install.
Uninterrupted power supply - When using the Power over LAN Midspans together with uninterrupted power supply (UPS) devices, EX4U network cameras and video servers can continue to operate even when there is a power failure.
Low installation costs - Avoids the need for separate power and data cable infrastructure and costly AC outlets. No electrician is needed -- the IT department or IT reseller/installer can do the job.
IEEE 802.3af compliance - The Power over LAN Midspans,  PoE AF Active Splitter and PoE Active Splitter 5V AF are IEEE 802.3af compliant, which ensures compatibility with future power over Ethernet products.
 Lenses & lens accessories
 

 Lens CS varifocal 3-8mm DC-IRIS (#5500-051)
Varifocal 3.0-8.0mm CS-mount lens, F1.0, DC-iris.  Manufactured by Tamron. Original lens for 211 Network Camera.


image - n/a
 Lens CS varifocal 3-8mm DC-IRIS D/N (#5500-061)
Varifocal 3.0-8.0mm CS-mount lens, F1.0, DC-iris. Manufactured by Pentax. IR corrected for Day/Night cameras. Original lens for   221 Day & Night Network Camera.
Power accessories
Mains adapters and extension cable
 

 PS-K is a power supply for 210, 211, 211A, 221, 230, 240Q, 241 and 250S available in 6 country specific versions.
9 V DC, Min. 1 A
#21065-EUR, 21066-UK, 21067-US, 21068-JP, 21069-AUS, 21070-KOR,
n/
 PS-L is a power supply for 205, 206, 206M, and  206W, available in 5 country specific versions.
5.1 V DC, Min. 500 mA
#21623-EUR, 21624-UK, 21625-US/JP, 21626-AUS, 21627-KOR
n/a
 Power supply for 213, available in 2 country specific versions.
Voltage: 13V DC, Max current: 1.8 A
#20191-US, 20713-EUR/UK

 Power supply for 214 PTZ. Input: 100-240V AC, 50-60Hz
Output: 12V DC, 3A
#5500-211

 PS-24, 24VAC power adapter for 225FD and 23xD Outdoor Housing.
#5000-001

 Extension cord for power supplies
Extension cable PS-D 3.3M US (#18608)
Extension cable PS-D 3.3M EUR (#18607)
Extension cable PS-K 3M (#5500-081)

295 Video Surveillance Joystick

(#0248-001)
 
 



 Easy joystick control of EX4U PTZ and dome network cameras
  • Easy to install and configure using USB interface
  • Durable high quality joystick
  • X/Y-axis for positioning and turning handle for zoom
  • 12 programmable push-buttons:
  • 2 on handle and 10 on base housing
Cost-efficient solution for control of PTZ and dome cameras
 
The 295 Video Surveillance Joystick isdesigned for applications developed for video surveillance systems. Thesensitivity allows for fast, flexible and secure operation with EX4U networkcameras with pan, tilt and zoom functionality.

Seamless integration
The 295 has a three-axisHall-effect joystick, 12 programmable push-buttons and USB interface. Itintegrates seamlessly with any video surveillance software platform recognizingjoystick inputs via Microsoft’s DirectX. Easy to install, you just connect thejoystick to the USB port on your computer and control the cameras.
 

213CM Connection Module
Works only with EX4U 213 PTZ Network Camera.
  • Provides full duplex (two-way) audio
  • 2 alarm inputs + 3 relay outputs
  • 1 analog video output (PAL/NTSC)
   
 Mounting accessories
 

 Black Metal Stand with pivot joint and standard 1/4" camera attachment screw. Original stand for the EX4U 221 and 230 Network Cameras.
Height: 131mm, Width: 89mm
#18617-EUR, 18618-US

  This Wall Bracket allows you to mount the 213 PTZ Network Camera on a wall, or other vertical surface.
Width: 20 cm (8 inches),  Depth: 11 cm (4.4 inches) ,  Height: 6 cm ( 2.4 inches)
#5500-071

  Clamp for mounting 206 and 207 Network Cameras, available as spare part.
#5004-001

  Bracket and cover plate for the 225FD drop ceiling mount.
#5003-001





top